MY FULL MASTER RECIPE PROCESS (2024)

MY FULL MASTER RECIPE PROCESS (1)

Welcome to my master recipe process;

Please note: I have included a gallery of step by step photos below to compliment the written process. My recommendation is, if this is your first time using my master recipe, please read it all through in conjunction with the photos, video links and notes before starting. Please let me know if you would then like me to clarify anything for you. And most importantly, have fun!

Before you begin: when you want to bake a loaf…

Feed all of your starter with 30g of strong white flour + 30g of water and stir it well, it does not need to be stirred excessively, it does not need to be smooth, a thick lumpy mix is fine. Cover the container again, sit it on your counter, and allow it to become fully active and ready to use, this can take 3-4 hours if you starter is as active as mine, it will take longer if your starter is less active or your kitchen is cold, it may take less time if your kitchen it warm.

If you keep it in the fridge, take your starter from the fridge and let it come up to room temperature before feeding, or, if you use your starter daily and it lives on the counter, feed it directly from the counter.

If you think that the mix feels a bit thin, add extra flour to thicken it up. Check out this page; for more information about your starter.

Once your starter is bubbly and active, start putting your dough together.

Time required: The process for making this loaf encompasses nearly 24 hours but the actual hands on input required is very little, 30 minutes at most.

Ingredients

50g starter

350g water

500g strong white bread flour*

Salt to taste

*see my recipe index, flour notes or book for flour/mixes options. If you are new to sourdough, I highly recommend using a good quality strong white bread flour as your starting point. This is the flour I use here in the UK from Matthews Cotswold Flours for my standard loaves. In the US I recommend using King Arthur Bread flour which will find here. Once you have mastered the process with a good strong white bread flour like these, the possibilities are endless!

This recipe makes 1 loaf.

Method

Step 1: Start this process when your starter is ready, around mid/late afternoon works well, I tend to begin making my doughs between4-5pm.

In your mixing bowl, mix the 50g of starter with the 350g of water; the water can be cold, cool or room temperature, it does not need to be a particular temperature. Stir the starter and water loosely together just to lift the starter off the bottom of the bowl.

Next, add the 500g of strong white bread flour to the bowl, and 1 teaspoon/4g of salt. (Please note that I only use a small amount of salt in my recipe, this suits my tastes; please feel free to increase it.)

Mix it all together loosely, so that it’s pretty ragged but all the flour and water is mixed; I tend to use a stainless steel tablespoon for this first rough mix, or use your hands, whichever you prefer. I follow this up using a bowl scraper to clean round the bowl and make sure it is all nicely roughly mixed together.

Cover the bowl with a shower cap or cover of your choice, and leave it for an hour or so on the kitchen counter. You do not need to time this, it does not need to be exact, around an hour is fine, if it is a bit longer, it will also be fine.

NOTE: You will see this process being called the ‘autolyse’ or pre-mix. I just call it the first stage.

*Put the rest of the starter in the fridge, you only ever need to keep around 100g of starter and you DO NOT need to feed it again after use, just store it, covered, in the fridge until you need it again.

Step 2: After an hour, remove the cover, and start to lift and fold the dough to build up the structure in the dough, wake up the gluten, and bring it into a smooth ball of dough. Literally pick up a small handful of dough from one side of the bowl, lift it and fold it over the rest of the dough to the other side of the bowl. Then turn the bowl and repeat the process, do it about 20-25 times maximum, until its a smooth ball.

Please note: you will only need to perform this many pulls and folds on this first occasion; after this, far fewer pulls and folds will be required to pull the dough into a ball before covering and leaving it again. You do NOT need to perform 20-25 each time. At this point the dough will be at its stickiest, from this point it will become less sticky with each handling.

I’ve included a link to my YouTube channel below to show videos of all of the processes; these two clips show the lifting and folding action:

trim.68C8334F-F0B0-4567-A72F-15CC675D4423

trim.663A5A06-D1CD-485A-A46D-82D784983F27

Cover the bowl again with your same cover, and leave it out on the kitchen counter.

Step 3: Over the next few hours, perform sets of the pulls and folds/lifting and folding actions 2 to 4 more times; these do not need to be done at fixed time periods apart, as long as you fit in sufficient sets during that time, that’s the key. I aim for 4 sets in total. The dough will not be starting to grow at this stage.

Each time you perform these pulls and folds, stop when the dough comes into a ball, that is the dough telling you it has had enough handling at that stage.

Step 4: Complete the final set, pulling the dough into a nice firm ball, then re cover the bowl, and leave it on the counter overnight. This is often termed as the ‘bulk fermentation’ period.

The ideal temperature for this is between 18C – 20C for 8-10 hours. If it is a lot colder than this, it will take longer, just give it a few more hours. If it is warmer it risks over proving, see my hints and tips and FAQs for assistance on how to prevent it.

Step 5: Next morning, the dough should have really grown within the bowl, to at least double, with a smoothish, slightly domed surface. There should be a nice structure to the dough, it does not need to bubbly, just grown.

Now, get your banneton out and sprinkle it with rice flour even if it has been prepared beforehand. It needs to be really well floured, all the way up the sides, so that the dough doesn’t stick.

*If you have a new banneton, see the equipment page for how to prepare it.

To place the dough into the banneton, perform a final round of pulls and folds with the dough, enough to bring it into a nice ball again, it should be bouncy and happy and you should be able to feel the structure in your dough. Do not worry about being heavy handed, and definitely do not be too gentle or nervous; if you have followed the steps and built up a good strong dough, you could sit on it and it would still bounce back amd bake well. So aim to create some tension in the dough so that it holds a ball on its own and sits proud on the middle of the bowl quite happily.

Lift and place the ball of dough, smooth side down into the banneton. Move the dough gently aside to be able to sprinkle rice flour down the sides of the dough. And ensure that you sprinkle some rice flour all over the top of the dough too to stop it from sticking to the parchment paper.

Cover it again with a shower cap/cover, and put it in the fridge for an absolute minimum of 3 hours, and up to 24 hours, the longer you leave it, the more the flavour will grow. I usually leave mine for an average of 10 hours. This means you can leave it there all day whilst you’re at work, or out for the day, and bake it on your return should you wish.

This is often call the ‘final proof’.

Step 6: After this time, you can choose whether to bake from a preheated or cold start; I bake all of mine from a cold start, it may sound counterintuitive, but I promise it works.

If you choose to preheat: preheat the oven now to 220C/425F fan/230-240C/450F non fan.

Remove the dough, in the banneton, from of the fridge once the oven is ready, line your enamel roaster with a sheet of parchment baking paper. Place the tin over the top of the banneton, then invert it/turn it all over together to turn the dough into the pot.

You should now have a lovely dome of dough, that holds it shape, decorated with a pattern of concentric flour rings from the banneton. Score the top of the dough with a lame or a clean razor blade, put the lid on and bake it for 50 mins.

To bake from a cold start: place the dough into the pan as above, score, put the lid on and place the pan into your cold oven. Turn the oven up to 220C/425F fan/230-240C/450F non fan and a timer on for 55 mins, leaving the lid on for the whole time. The time required in the oven starts from the point you place the pan into the cold oven and switch it on, not from the time the oven reaches the required temperature. For more information about cold baking read more here.

Leave it to bake: DO NOT be tempted to peek, do not open and close the oven, resist any urge to do so to look at it.

Step 7: After the 50 or 55 minutes, remove the whole pan from the oven, carefully take the loaf from the pan, tilt it whilst still wearing your oven gloves to remove the parchment paper from the bottom, (and keep it to use again like I do) then leave the loaf on a rack to cool.

If after the required time, you prefer a darker loaf or you feel that yours look pale, you can remove the lid and bake for a further 5-10 mins; I prefer to keep the lid on for the entire bake as I like the colour I get.

Wait AT LEAST an hour before you slice into it. If you cut into the loaf too soon, it will still be cooking, and steam will fill all of those carefully crafted holes and make the bread gummy.

Enjoy!

*Please note: if you preheat your oven you do NOT need to preheat the pot. If you are using a cast iron Dutch oven, or heavy pot of any kind, you still don’t need to preheat the pot. Bake as per below and if when you lift the lid, the loaf seems a bit pale or blonde, put it back in the oven for 5-10 mins to brown.

Below is a set of images showing the steps of my process:

  • MY FULL MASTER RECIPE PROCESS (2)
  • MY FULL MASTER RECIPE PROCESS (3)
  • MY FULL MASTER RECIPE PROCESS (4)
  • MY FULL MASTER RECIPE PROCESS (5)
  • MY FULL MASTER RECIPE PROCESS (6)
  • MY FULL MASTER RECIPE PROCESS (7)
  • MY FULL MASTER RECIPE PROCESS (8)
  • MY FULL MASTER RECIPE PROCESS (9)
  • MY FULL MASTER RECIPE PROCESS (10)
  • MY FULL MASTER RECIPE PROCESS (11)
  • MY FULL MASTER RECIPE PROCESS (12)
  • MY FULL MASTER RECIPE PROCESS (13)
  • MY FULL MASTER RECIPE PROCESS (14)
  • MY FULL MASTER RECIPE PROCESS (15)
  • MY FULL MASTER RECIPE PROCESS (16)
  • MY FULL MASTER RECIPE PROCESS (17)
  • MY FULL MASTER RECIPE PROCESS (18)
  • MY FULL MASTER RECIPE PROCESS (19)
  • MY FULL MASTER RECIPE PROCESS (20)
  • MY FULL MASTER RECIPE PROCESS (21)
  • MY FULL MASTER RECIPE PROCESS (22)
  • MY FULL MASTER RECIPE PROCESS (23)
  • MY FULL MASTER RECIPE PROCESS (24)
MY FULL MASTER RECIPE PROCESS (25)

For more information for your sourdough success, read my page about flour, check out more hints and tips for your sourdough making, see my baking timetables for fitting sourdough into your life, scoring your dough and storing your dough

I have put videos for all of the pulling and folding and other elements on my YouTube channel.

Once you have mastered this process and feel comfortable using the starter and managing the dough, the possibilities are endless, and addictive! I would strongly advise that you get comfortable with sourdough using non organic strong white bread flour before you start experimenting; it is a perfect learning ground.

And then, experiment at will!

For more sourdough ideas, check out my recipe index for more ways to use your dough, try new flours, bake from a cold start, and have more sourdough fun!


Follow me on Instagram for day to day sourdough news, share your bakes with me on Facebook, and always feel free to contact me with any questions. If you found this page useful, buy me a cup of tea x

MY FULL MASTER RECIPE PROCESS (26)
MY FULL MASTER RECIPE PROCESS (2024)

FAQs

What is the process of making sourdough? ›

Understanding the Stages of Sourdough
  1. Autolyse. The first step in the sourdough process is combining the flour, water and starter. ...
  2. Bulk Fermentation. ...
  3. Stretching and Folding the Dough. ...
  4. Fermenting in the Fridge. ...
  5. Laminating the Dough. ...
  6. Shaping the Dough and Building Tension. ...
  7. Proofing.
Mar 9, 2023

What makes the perfect sourdough? ›

A sourdough loaf made with 500g of good quality bread flour, 50g to 100g of sourdough starter, left to ferment for adequate time, will produce a light, airy loaf with a lacy, open crumb that is not wet or dense in any way.

How long does sourdough starter last? ›

Your sourdough starter is the foundation of baking sourdough bread. Through proper maintenance and a little attention, it can last indefinitely and provide you with countless healthy and delicious loaves of bread.

How much sourdough starter to use for 500g flour? ›

How do percentages work – the simple way
IngredientsQuantities / Percentages
Flour500g / 100%
Water350g / 70% (=350/500)
Starter100g / 20% (=100/500)
Salt10g / 2% (=10/500)

What is the best flour for sourdough starter? ›

All-purpose Flour

It strikes a perfect balance of softness and structure, making it an ideal choice for various recipes. Due to its wide availability and affordability, all-purpose flour is often my top recommendation for creating and maintaining a sourdough starter.

Is homemade sourdough processed? ›

Any food which is altered during preparation is being processed - the greater the alteration, the more processing involved. A loaf of homemade sourdough bread, for example, is more processed than a bag of pre-cut green beans.

What is the secret to a good sourdough starter? ›

Active sourdough starter should have bubbles in it and also smell fresh and fruity. If yours seems a little sluggish, just keep it out of the fridge and step up the feeding schedule. Once you feed it every day for a few days to a week, it should show signs of life again.

Why is my sourdough not fluffy? ›

If your bread is very compact and the crumb is super tight, it can mean that the hydration level was not enough for amount of flour used. Increasing the water content will help to alleviate this issue. If you're working with higher hydration dough, consider lamination for superior dough strength.

Why is my sourdough so chewy? ›

Uneven heat in your oven can be the culprit – if you loaf is nicely golden on the outside but gummy or moist in the inside, it's baking too quickly on the outside. Trying reducing the temperature you're baking at and bake for a bit longer. Experiment until you find the sweet spot, and take notes along the way.

Do you have to discard sourdough starter every time you feed it? ›

It would be best if you discarded some portion of your starter each time you feed it unless you want to continue to let it grow. Eventually, you need to discard the used “food” (flour and water) that's been used to sustain your starter during the last fermentation period.

How do I know if I killed my sourdough starter? ›

Keep feeding your starter, and you'll see normal activity (bubbles) return in a few days. If your starter has a bit of dark liquid on top, it's not dead! It simply means it's hungry and that it's time to feed it. Unless your starter has a pink or orange hue or is beginning to mold, you probably haven't killed it yet.

What happens if I forgot to discard starter before feeding? ›

If you didn't discard a portion of your starter each time you feed it, two things would happen: Your starter would grow to an enormous, unmanageable size. Your starter would likely become more and more inhospitable to the bacteria and yeast we want as the mixture would become ever more acidic.

What happens if I put too much starter in my sourdough? ›

The colony of wild yeast and bacteria inside your starter jar are fairly resilient, however, like most living things, they can be overfed. When you overfeed a sourdough starter you dilute the natural population of yeast and bacteria, making your sourdough culture weak and inactive.

How soon after feeding sourdough starter can I use it? ›

Fed sourdough starter refers to a starter that has been fed flour and water (preferably by weight). You should feed the starter equal or greater than its weight after discarding a portion. You should wait at least 2-4 hours or until the starter is at its peak before you use it in your baking.

Can you add too much flour to sourdough starter? ›

Overfeeding can be a cause of this “sickness,” as can lack of feeding and neglect. Because, yes, you can overfeed your sourdough. The explanation is quite simple: if you add too much water and flour, you're basically diluting the natural population of yeast and bacteria.

How long is the process of making sourdough? ›

Once your starter is bubbly and active, start putting your dough together. Time required: The process for making this loaf encompasses nearly 24 hours but the actual hands on input required is very little, 30 minutes at most.

What fermentation method is sourdough? ›

Sourdough starter can be initiated by mixing flour and water and leaving the mixture in a warm place overnight for spontaneous fermentation. After 12–24 h, visible fermentation has occurred, and the dough will possess a sour, alcoholic odor.

What the heck is sourdough starter? ›

Composed of fermented flour and water, a sourdough starter is a leavening agent that uses naturally occurring yeasts and bacteria to make baked goods rise.

Can you buy sourdough starter? ›

You can purchase starter at King Arthur Flour company online. You will need to feed it, but it should be ready to use within a week. Do you have to discard a sourdough starter every time you feed it?

References

Top Articles
Latest Posts
Recommended Articles
Article information

Author: Gregorio Kreiger

Last Updated:

Views: 6254

Rating: 4.7 / 5 (57 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Gregorio Kreiger

Birthday: 1994-12-18

Address: 89212 Tracey Ramp, Sunside, MT 08453-0951

Phone: +9014805370218

Job: Customer Designer

Hobby: Mountain biking, Orienteering, Hiking, Sewing, Backpacking, Mushroom hunting, Backpacking

Introduction: My name is Gregorio Kreiger, I am a tender, brainy, enthusiastic, combative, agreeable, gentle, gentle person who loves writing and wants to share my knowledge and understanding with you.